Socks and Tools
- Days active
- 1
Socks and Tools
The genuine DEWALT DCB609 FLEXVOLT 9.0Ah battery automatically changes voltage to run both DEWALT 20V MAX and 60V MAX FLEXVOLT tools, with serious capacity for long, heavy-duty jobs. Genuine DEWALT FLEXVOLT: 20V/60V MAX 9.0Ah lithium-ion battery Two voltages, one battery: Runs 20V MAX and 60V MAX FLEXVOLT tools Extended runtime: 9.0Ah capacity for high-demand tools Fuel gauge: Built-in LED state-of-charge indicator
Featuring a folding hinge to conserve storage space and ease transport, this string trimmer delivers high performance with a powerful brushless motor. The variable speed trigger provides control, letting you choose between longer runtime on low speed or increased power on high speed, while the adjustable swath offers a 13–15" cutting capacity. Up to 55 minutes of (no-load) runtime per charge Ergonomic design helps minimize user fatigue during strenuous tasks Adjustable swath offers a 13–15" cutting capacity Quick load spool head allows users to easily reload line High-efficiency brushless motor offers low maintenance Variable speed trigger for extended runtime or more power Folding hinge makes the trimmer 40% shorter in length when folded
The TOPDON ArtiLink500B combines an OBD2 code reader and a battery tester in one handheld tool for checking engine lights and battery health. Reads and clears check engine codes, with built-in DTC lookup Performs all 10 OBD2 modes on most models released after 1996 Live data with graphing, freeze frame data, O2 sensor, on-board monitor and EVAP tests One-touch I/M readiness button for quick emissions checks Tests 12V lead-acid batteries plus 12V/24V cranking and charging systems Reads vehicle information including VIN, CIN and CVN 2.8 in TFT color screen Stores test records and prints reports via PC, with free software updates via PC
• Ever grab a 13mm socket and it’s too tight, but 14mm feels lose? And it’s not SAE?• Not every bolt and nut on vehicles remain factory perfect to the millimeter over time and service life• Use 0.5mm under sockets for rounded and damaged bolts and nuts, use 0.5mm over for swollen or corroded bolts and cap covered nuts• For hand tools and impact wrenches, use a hammer to fit 1/2 size under sockets where needed
M18 Drill and Hex Impact Combo Kit has the Most Powerful Drill, including AutoStop™ Control Mode for enhanced safety and the Fastest Driving Impact Driver. Includes an M18 FUEL™ 1/2" Hammer Drill, M18 FUEL™ 1/4" Hex Impact Driver, (2) M18™ REDLITHIUM™ XC 5.0Ah Battery Pack, with an M18™/M12™ charger and carrying case. Our M18 FUEL™ ½” Drill Driver is the Industry's Most Powerful Drill and Most Compact solution. The POWERSTATE™ Brushless motor delivers the most power under load to complete 2-9/16" Self-Feed holes in dense materials for increased productivity and capability. At only 6.9” in length, this is the most compact drill in its class. The AUTO STOP™ Control Mode offers enhanced safety for the user by preventing over-rotation in a bind-up with the best reaction time in the industry. Our M18 FUEL™ ¼” Hex Impact Driver is the Most POWERFUL and FASTEST DRIVING impact driver, featuring ULTIMATE TRIGGER CONTROL. Our POWERSTATE™ Brushless motor delivers unmatched power for a full range of capabilities to complete the widest variety of applications. Increase productivity on the jobsite with the fastest driving speed without sacrificing power or control. REDLINK PLUS™ intelligence delivers ULTIMATE TRIGGER CONTROL by providing smooth acceleration for small fasteners to prevent stripping of screws or damaging of materials. Our M18 FUEL™ 2-Tool Combo kit is part of the M18™ system which is fully compatible with over 200+ solutions.
KNIPEX tools are highly regarded for their exceptional quality, reliability, and versatility. Designed with precision and crafted using quality materials, KNIPEX tools deliver outstanding performance across a wide range of applications. Includes one (1) of each: 10" TwinGrip, 10" High Leverage Diagonal Cutter and free KNIPEX Crafted 7" Bottle Opener Grip and pop the top with a 7" TwinGrip‑inspired bottle opener Zinc die cast bottle opener proudly made in the USA 82 01 250 - 10" TwinGrip Pliers Easily grip stripped screws and bolts with the front and side gripping areas Front jaw design grips even the toughest stripped screws Optimized side jaw with opposing teeth for maximum force when gripping round, square and hex materials Seven push-button adjustments - adjust once and it stays 74 01 250 - 10" High Leverage Diagonal Cutters High cutting performance with minimum effort due to optimum coordination of the cutting edge angle and transmission ratio Unique heavy-duty forged-on axle for superior strength 20% easier cutting due to high leverage design Precision cutting edges induction hardened (approx. 64 HRC) cut several types of wire including piano wire
The GEARWRENCH 80942 is the complete master set for the shop or garage: 239 pieces covering 1/4", 3/8" and 1/2" drive in both SAE and metric, all organized in a 3-drawer steel storage box. Three 90-tooth teardrop ratchets deliver a 4° swing arc for tight quarters, and every socket and wrench uses off-corner loading to reduce fastener rounding. Full polish chrome wipes clean fast.Features Full polish chrome SAE and metric 1/4", 3/8" and 1/2" standard sockets, plus 1/4" and 3/8" deep sockets (6 and 12 point) Three 90-tooth teardrop ratchets (1/4" x 5", 3/8" x 8", 1/2" x 11") with low-profile heads and flush-mounted on/off switches 12 point full polish long pattern combination wrenches with 15° offset box end for knuckle clearance Off-corner loading design on sockets and wrenches reduces fastener rounding SAE and metric long arm hex keys Magnetic bit driver with 9 bits (Torx, slotted and Phillips) Chamfered extension bars with angled entry guide quickly onto drive tools 3-drawer storage box with independent sliding drawers, locking side flaps, steel hinged lid and durable handle Meets or exceeds ASME specifications Specifications Piece count: 239 Drive sizes: 1/4", 3/8", 1/2" Size range: 5/32" to 1-1/2" / 4mm to 27mm Ratchet tooth count: 90 Finish: Full polish chrome Box dimensions: 19" L x 13" W x 12" H Weight: 41.7 lb UPC: 099575809422 Warranty: GEARWRENCH Full Lifetime Warranty.Closeout item — limited quantities available.
Four full polish flex head ratchets that cover every drive size you use every day. The GEARWRENCH 81230T set delivers a 90-tooth gear with a 4° swing arc so you can turn fasteners in tight confines, and a 6-position flexible head to reach around obstructions. Teardrop low-profile heads with a flush-mounted on/off switch get into spaces standard ratchets can't. Includes a 1/4" x 7", a 3/8" x 5" stubby, a 3/8" x 11" and a 1/2" x 17" ratchet in a plastic storage tray.Features 90-tooth gear delivers a 4° swing arc to turn a fastener in tight confines Teardrop, low-profile head and flush-mounted on/off switch allow better access in tight spaces 6 position flexible head provides access for hard to reach fasteners Enclosed head design for extreme resistance to dirt infiltration Precision engineered high strength pawl for increased durability Highly visible on/off markings on the head Bright, full polish chrome finish easily wipes clean and resists corrosion Meets or exceeds ASME B107.10 specifications Set Contents 81012T – 1/4" Drive 90-Tooth Flex Head Teardrop Ratchet, 7" 81212T – 3/8" Drive 90-Tooth Stubby Flex Head Teardrop Ratchet, 5" 81215T – 3/8" Drive 90-Tooth Flex Head Teardrop Ratchet, 11" 81306T – 1/2" Drive 90-Tooth Flex Head Teardrop Ratchet, 17" Specifications Drive sizes: 1/4", 3/8", 1/2" Tooth count: 90 / 4° swing arc Head style: Teardrop, flex Finish: Full polish chrome Included storage: Plastic tray Weight: 3.5 lb UPC: 099575002304 Warranty: GEARWRENCH Full Lifetime Warranty.Closeout item — limited quantities available.
These ads come from an AirOps research workspace that tracks sample prompts across industries. All prompts run in the US. This library is for informational purposes only and uses a sample dataset, not a comprehensive one. It is not affiliated with OpenAI Ads or ChatGPT.